this is my lsusb Code:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 413c:2003 Dell Computer Corp. Keyboard
Bus 003 Device 002: ID 413c:3200 Dell Computer Corp. Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0bda:8176 Realtek Semiconductor Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
list of all driver modules that my system is loading Code:
Module Size Used by
nls_utf8 1069 1
isofs 30022 1
parport_pc 26058 0
ppdev 5556 0
dm_crypt 11385 0
binfmt_misc 6599 1
snd_intel8x0 25632 2
snd_ac97_codec 99227 1 snd_intel8x0
ac97_bus 1014 1 snd_ac97_codec
snd_pcm 71475 2 snd_intel8x0,snd_ac97_codec
snd_seq_midi 4588 0
snd_rawmidi 17783 1 snd_seq_midi
snd_seq_midi_event 6047 1 snd_seq_midi
snd_seq 47174 2 snd_seq_midi,snd_seq_midi_event
snd_timer 19067 2 snd_pcm,snd_seq
snd_seq_device 5744 3 snd_seq_midi,snd_rawmidi,snd_seq
ndiswrapper 184207 0
snd 49006 11 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse 59033 0
serio_raw 4022 0
soundcore 880 1 snd
snd_page_alloc 7120 2 snd_intel8x0,snd_pcm
lp 7342 0
parport 31492 3 parport_pc,ppdev,lp
dm_raid45 81721 0
xor 15136 1 dm_raid45
btrfs 489451 0
zlib_deflate 19266 1 btrfs
crc32c 2531 1
libcrc32c 887 1 btrfs
usbhid 36882 0
hid 67742 1 usbhid
i915 290938 3
drm_kms_helper 30200 1 i915
drm 168054 4 i915,drm_kms_helper
floppy 54311 0
intel_agp 26360 2 i915
tg3 123310 0
agpgart 32011 2 drm,intel_agp
i2c_algo_bit 5168 1 i915
video 18712 1 i915
output 1883 1 video
error codes: Code:
[ 0.186568] pci 0000:00:1f.2: PME# disabled
[ 0.186644] pci 0000:00:1c.0: PCI bridge to [bus 20-20]
[ 0.186652] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.186661] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.186671] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.186782] pci 0000:40:00.0: reg 10: [mem 0xf0400000-0xf040ffff 64bit]
[ 0.186875] pci 0000:40:00.0: PME# supported from D3hot D3cold
[ 0.186884] pci 0000:40:00.0: PME# disabled
[ 0.186907] pci 0000:40:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.186924] pci 0000:00:1c.1: PCI bridge to [bus 40-40]
[ 0.186932] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.186940] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf04fffff]
[ 0.186951] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.187042] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.187050] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.187058] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.187069] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.187075] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.187081] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.187105] pci_bus 0000:00: on NUMA node 0
[ 0.187115] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.187535] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
[ 0.187711] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX2._PRT]
[ 0.187899] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[ 0.188738] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100428/nspredef-352)
[ 0.188757] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.188761] _OSC request data:1 1f 1f
[ 0.210508] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.210725] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.210928] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.211127] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.211329] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.211532] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.211730] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.211936] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.212055] HEST: Table is not found!
[ 0.212202] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.212227] vgaarb: loaded
[ 0.212587] SCSI subsystem initialized
[ 0.212748] libata version 3.00 loaded.
[ 0.212870] usbcore: registered new interface driver usbfs
[ 0.212899] usbcore: registered new interface driver hub
[ 0.212955] usbcore: registered new device driver usb
[ 0.213386] ACPI: WMI: Mapper loaded
[ 0.213393] PCI: Using ACPI for IRQ routing
[ 0.213399] PCI: pci_cache_line_size set to 64 bytes
[ 0.213512] reserve RAM buffer: 0000000000002000 - 000000000000ffff
[ 0.213518] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.213523] reserve RAM buffer: 000000005f7e4000 - 000000005fffffff
[ 0.213716] NetLabel: Initializing
[ 0.213720] NetLabel: domain hash size = 128
[ 0.213724] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.213748] NetLabel: unlabeled traffic allowed by default
[ 0.213904] hpet clockevent registered
[ 0.213911] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.213919] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.213930] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.216198] Switching to clocksource tsc
[ 0.238776] AppArmor: AppArmor Filesystem Enabled
[ 0.238804] pnp: PnP ACPI init
[ 0.238838] ACPI: bus type pnp registered
[ 0.241679] pnp 00:0a: disabling [io 0xf800-0xf81f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
[ 0.241688] pnp 00:0a: disabling [io 0xf820-0xf83f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
[ 0.241696] pnp 00:0a: disabling [io 0xf840-0xf85f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
[ 0.241703] pnp 00:0a: disabling [io 0xf860-0xf87f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
[ 0.243564] pnp: PnP ACPI: found 13 devices
[ 0.243569] ACPI: ACPI bus type pnp unregistered
[ 0.243576] PnPBIOS: Disabled by ACPI PNP
[ 0.243608] system 00:0a: [io 0x0400-0x041f] has been reserved
[ 0.243635] system 00:0a: [io 0x0420-0x043f] has been reserved
[ 0.243642] system 00:0a: [io 0x0440-0x045f] has been reserved
[ 0.243648] system 00:0a: [io 0x0460-0x047f] has been reserved
[ 0.243654] system 00:0a: [io 0x0480-0x048f] has been reserved
[ 0.243660] system 00:0a: [io 0xfa00-0xfa3f] has been reserved
[ 0.243666] system 00:0a: [io 0xfc00-0xfc7f] has been reserved
[ 0.243672] system 00:0a: [io 0xfc80-0xfcff] has been reserved
[ 0.243679] system 00:0a: [io 0xfe00-0xfe7f] has been reserved
[ 0.243685] system 00:0a: [io 0xfe80-0xfeff] has been reserved
[ 0.243699] system 00:0b: [io 0x04d0-0x04d1] has been reserved
[ 0.243706] system 00:0b: [io 0x2000-0x2fff window] has been reserved
[ 0.243713] system 00:0b: [io 0x5000-0x6fff window] has been reserved
[ 0.243719] system 00:0b: [io 0xa000-0xafff window] has been reserved
[ 0.243732] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.243740] system 00:0c: [mem 0x00100000-0x5fffffff] could not be reserved
[ 0.243748] system 00:0c: [mem 0x000e8000-0x000fffff] could not be reserved
[ 0.243755] system 00:0c: [mem 0xfec01000-0xffffffff] has been reserved
[ 0.243761] system 00:0c: [mem 0xd0000000-0xdfffffff] has been reserved
[ 0.243768] system 00:0c: [mem 0x000cd800-0x000e7fff] has been reserved
[ 0.282006] pci 0000:00:1c.0: BAR 14: assigned [mem 0x60000000-0x601fffff]
[ 0.282018] pci 0000:00:1c.0: BAR 15: assigned [mem 0x60200000-0x603fffff 64bit pref]
[ 0.282026] pci 0000:00:1c.1: BAR 15: assigned [mem 0x60400000-0x605fffff 64bit pref]
[ 0.282034] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.282041] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.282047] pci 0000:00:1c.0: PCI bridge to [bus 20-20]
[ 0.282054] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.282063] pci 0000:00:1c.0: bridge window [mem 0x60000000-0x601fffff]
[ 0.282071] pci 0000:00:1c.0: bridge window [mem 0x60200000-0x603fffff 64bit pref]
[ 0.282082] pci 0000:00:1c.1: PCI bridge to [bus 40-40]
[ 0.282089] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.282098] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf04fffff]
[ 0.282106] pci 0000:00:1c.1: bridge window [mem 0x60400000-0x605fffff 64bit pref]
[ 0.282117] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.282122] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.282130] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.282137] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.282162] pci 0000:00:1c.0: setting latency timer to 64
[ 0.282181] alloc irq_desc for 17 on node -1
[ 0.282186] alloc kstat_irqs on node -1
[ 0.282198] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.282207] pci 0000:00:1c.1: setting latency timer to 64
[ 0.282218] pci 0000:00:1e.0: setting latency timer to 64
[ 0.282226] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.282231] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.282237] pci_bus 0000:20: resource 0 [io 0x3000-0x3fff]
[ 0.282242] pci_bus 0000:20: resource 1 [mem 0x60000000-0x601fffff]
[ 0.282248] pci_bus 0000:20: resource 2 [mem 0x60200000-0x603fffff 64bit pref]
[ 0.282254] pci_bus 0000:40: resource 0 [io 0x4000-0x4fff]
[ 0.282259] pci_bus 0000:40: resource 1 [mem 0xf0200000-0xf04fffff]
[ 0.282264] pci_bus 0000:40: resource 2 [mem 0x60400000-0x605fffff 64bit pref]
[ 0.282270] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
[ 0.282276] pci_bus 0000:05: resource 5 [mem 0x00000000-0xffffffff]
[ 0.282348] NET: Registered protocol family 2
[ 0.282481] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.282995] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.283827] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.284297] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.284302] TCP reno registered
[ 0.284310] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.284328] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.284562] NET: Registered protocol family 1
[ 0.284596] pci 0000:00:02.0: Boot video device
[ 0.284738] PCI: CLS 64 bytes, default 64
[ 0.285099] cpufreq-nforce2: No nForce2 chipset.
[ 0.285167] Scanning for low memory corruption every 60 seconds
[ 0.285418] audit: initializing netlink socket (disabled)
[ 0.285434] type=2000 audit(1322839089.280:1): initialized
[ 0.300175] highmem bounce pool size: 64 pages
[ 0.300187] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.303407] VFS: Disk quotas dquot_6.5.2
[ 0.303555] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.304932] fuse init (API version 7.14)
[ 0.305133] msgmni has been set to 1686
[ 0.305868] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.305874] io scheduler noop registered
[ 0.305880] io scheduler deadline registered
[ 0.305912] io scheduler cfq registered (default)
[ 0.306117] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.306168] alloc irq_desc for 40 on node -1
[ 0.306173] alloc kstat_irqs on node -1
[ 0.306189] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.306350] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.306397] alloc irq_desc for 41 on node -1
[ 0.306401] alloc kstat_irqs on node -1
[ 0.306413] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.306616] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.306858] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100428/nspredef-352)
[ 0.306878] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.306882] _OSC request data:1 0 1f
[ 0.307092] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100428/nspredef-352)
[ 0.307110] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.307114] _OSC request data:1 0 1f
[ 0.307355] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100428/nspredef-352)
[ 0.307372] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.307376] _OSC request data:1 0 1f
[ 0.307577] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20100428/nspredef-352)
[ 0.307595] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.307599] _OSC request data:1 0 1f
[ 0.307660] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.308072] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.308091] ACPI: Power Button [PBTN]
[ 0.308187] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.308196] ACPI: Power Button [PWRF]
[ 0.308637] ACPI: acpi_idle registered with cpuidle
[ 0.311911] ERST: Table is not found!
[ 0.312188] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.315340] brd: module loaded
[ 0.316584] loop: module loaded
[ 0.317007] ata_piix 0000:00:1f.1: version 2.13
[ 0.317031] ata_piix 0000:00:1f.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.317103] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.317253] scsi0 : ata_piix
[ 0.317435] scsi1 : ata_piix
[ 0.317707] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x14e0 irq 14
[ 0.317714] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x14e8 irq 15
[ 0.317753] alloc irq_desc for 19 on node -1
[ 0.317758] alloc kstat_irqs on node -1
[ 0.317771] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.317780] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.317902] isapnp: Scanning for PnP cards...
[ 0.497632] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.541261] scsi2 : ata_piix
[ 0.567710] scsi3 : ata_piix
[ 0.567999] ata3: SATA max UDMA/133 cmd 0x1818 ctl 0x1830 bmdma 0x14f0 irq 19
[ 0.568005] ata4: SATA max UDMA/133 cmd 0x1820 ctl 0x1834 bmdma 0x14f8 irq 19
[ 0.568685] Fixed MDIO Bus: probed
[ 0.568758] PPP generic driver version 2.4.2
[ 0.568863] tun: Universal TUN/TAP device driver, 1.6
[ 0.568867] tun: (C) 1999-2004 Max Krasnyansky <maxkqualcomm>
[ 0.569027] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.569065] alloc irq_desc for 20 on node -1
[ 0.569069] alloc kstat_irqs on node -1
[ 0.569082] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.569107] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.569114] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.569179] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.569221] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.573112] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.573141] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xcfdc0000
[ 0.585478] ata1.00: ATAPI: HL-DT-ST GCR-8240N, 1.05, max MWDMA2
[ 0.606881] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.607157] hub 1-0:1.0: USB hub found
[ 0.607167] hub 1-0:1.0: 8 ports detected
[ 0.607314] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.607347] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.607412] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.607424] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.607429] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.607499] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.607532] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001440
[ 0.607781] hub 2-0:1.0: USB hub found
[ 0.607790] hub 2-0:1.0: 2 ports detected
[ 0.607894] alloc irq_desc for 18 on node -1
[ 0.607899] alloc kstat_irqs on node -1
[ 0.607910] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 0.607920] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.607925] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.607993] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.608038] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001460
[ 0.608257] hub 3-0:1.0: USB hub found
[ 0.608265] hub 3-0:1.0: 2 ports detected
[ 0.608364] alloc irq_desc for 21 on node -1
[ 0.608369] alloc kstat_irqs on node -1
[ 0.608376] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 0.608386] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.608392] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.608460] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.608501] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001480
[ 0.608716] hub 4-0:1.0: USB hub found
[ 0.608724] hub 4-0:1.0: 2 ports detected
[ 0.608827] alloc irq_desc for 22 on node -1
[ 0.608832] alloc kstat_irqs on node -1
[ 0.608841] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[ 0.608850] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.608855] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.608919] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.608961] uhci_hcd 0000:00:1d.3: irq 22, io base 0x000014a0
[ 0.609174] hub 5-0:1.0: USB hub found
[ 0.609182] hub 5-0:1.0: 2 ports detected
[ 0.609409] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 0.612112] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.612123] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.612332] mice: PS/2 mouse device common for all mice
[ 0.612560] rtc_cmos 00:03: RTC can wake from S4
[ 0.612632] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.612665] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.612886] device-mapper: uevent: version 1.0.3
[ 0.620377] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-develredhat.
[ 0.634240] device-mapper: multipath: version 1.1.1 loaded
[ 0.634247] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.643972] EISA: Probing bus 0 at eisa.0
[ 0.643983] Cannot allocate resource for EISA slot 1
[ 0.643989] Cannot allocate resource for EISA slot 2
[ 0.643993] Cannot allocate resource for EISA slot 3
[ 0.643997] Cannot allocate resource for EISA slot 4
[ 0.644002] Cannot allocate resource for EISA slot 5
[ 0.644005] Cannot allocate resource for EISA slot 6
[ 0.644017] EISA: Detected 0 cards.
[ 0.663910] cpuidle: using governor ladder
[ 0.663918] cpuidle: using governor menu
[ 0.664564] TCP cubic registered
[ 0.664848] NET: Registered protocol family 10
[ 0.665576] lo: Disabled Privacy Extensions
[ 0.666067] NET: Registered protocol family 17
[ 0.666156] Using IPI No-Shortcut mode
[ 0.666341] PM: Resume from disk failed.
[ 0.666365] registered taskstats version 1
[ 0.666654] Magic number: 7:49:335
[ 0.666695] tty tty56: hash matches
[ 0.666771] rtc_cmos 00:03: setting system clock to 2011-12-02 15:18:09 UTC (1322839089)
[ 0.666776] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.666780] EDD information not available.
[ 0.672883] isapnp: No Plug & Play device found
[ 0.673222] ata1.00: configured for MWDMA2
[ 0.675186] scsi 0:0:0:0: CD-ROM HL-DT-ST CD-ROM GCR-8240N 1.05 PQ: 0 ANSI: 5
[ 0.677207] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 0.677215] Uniform CD-ROM driver Revision: 3.20
[ 0.677431] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.677558] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.791994] ata3.00: ATA-7: SAMSUNG HD161GJ, 1AC01118, max UDMA7
[ 0.792002] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.800014] ata3.00: configured for UDMA/133
[ 0.800211] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD161GJ 1AC0 PQ: 0 ANSI: 5
[ 0.800525] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 0.800665] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 0.800791] sd 2:0:0:0: [sda] Write Protect is off
[ 0.800799] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.800857] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.801162] sda: sda1 sda2 <
[ 0.838589] Freeing initrd memory: 15836k freed
[ 0.838645] sda5 >
[ 0.840376] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.853988] Freeing unused kernel memory: 684k freed
[ 0.854838] Write protecting the kernel text: 4932k
[ 0.854900] Write protecting the kernel read-only data: 1976k
[ 0.886082] udev[85]: starting version 163
[ 1.031807] usb 1-7: new high speed USB device using ehci_hcd and address 4
[ 1.105932] tg3.c:v3.110 (April 9, 2010)
[ 1.105966] tg3 0000:40:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.105983] tg3 0000:40:00.0: setting latency timer to 64
[ 1.156722] Linux agpgart interface v0.103
[ 1.179113] agpgart-intel 0000:00:00.0: Intel 915G Chipset
[ 1.179893] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 1.186918] agpgart-intel 0000:00:00.0: AGP aperture is 256M 0xe0000000
[ 1.187913] tg3 0000:40:00.0: eth0: Tigon3 [partno(BCM95751) rev 4001] (PCI Express) MAC address 00:14:c2:08:4c:5a
[ 1.187923] tg3 0000:40:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 1.187931] tg3 0000:40:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.187937] tg3 0000:40:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.222938] FDC 0 is a post-1991 82077
[ 1.223490] [drm] Initialized drm 1.1.0 20060810
[ 1.260406] alloc irq_desc for 16 on node -1
[ 1.260413] alloc kstat_irqs on node -1
[ 1.260424] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.260430] i915 0000:00:02.0: setting latency timer to 64
[ 1.293465] [drm] set up 7M of stolen space
[ 1.294037] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.294425] [drm] initialized overlay support
[ 1.396019] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 1.590452] Console: switching to colour frame buffer device 160x64
[ 1.595673] usbcore: registered new interface driver hiddev
[ 1.598347] fb0: inteldrmfb frame buffer device
[ 1.598350] drm: registered panic notifier
[ 1.598358] Slow work thread pool: Starting up
[ 1.598443] Slow work thread pool: Ready
[ 1.598460] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.611027] input: Dell Dell USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input2
[ 1.611259] generic-usb 0003:413C:3200.0001: input,hidraw0: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:1d.1-1/input0
[ 1.611300] usbcore: registered new interface driver usbhid
[ 1.611305] usbhid: USB HID core driver
[ 1.816027] usb 3-2: new low speed USB device using uhci_hcd and address 3
[ 2.009998] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input3
[ 2.010244] generic-usb 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-2/input0
[ 2.075753] Btrfs loaded
[ 2.084387] xor: automatically using best checksumming function: pIII_sse
[ 2.104014] pIII_sse : 4031.000 MB/sec
[ 2.104019] xor: using function: pIII_sse (4031.000 MB/sec)
[ 2.108194] device-mapper: dm-raid45: initialized v0.2594b
[ 9.290365] sr 0:0:0:0: [sr0] Unhandled sense code
[ 9.290371] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 9.290377] sr 0:0:0:0: [sr0] Sense Key : Medium Error [current]
[ 9.290384] sr 0:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
[ 9.290391] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 80 00 00 00 02 00
[ 9.290406] end_request: I/O error, dev sr0, sector 131072
[ 9.290412] Buffer I/O error on device sr0, logical block 32768
[ 9.290418] Buffer I/O error on device sr0, logical block 32769
[ 16.302819] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 16.302826] EXT4-fs (sda1): write access will be enabled during recovery
[ 18.914735] EXT4-fs (sda1): orphan cleanup on readonly fs
[ 18.914751] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3808516
[ 18.914852] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3808855
[ 18.914915] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3808839
[ 18.914944] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3808833
[ 18.914972] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3808826
[ 18.915001] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3808689
[ 18.915030] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3808670
[ 18.915059] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3808636
[ 18.915087] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3808635
[ 18.915114] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3808525
[ 18.915141] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3808523
[ 18.915167] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3808522
[ 18.915194] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3808521
[ 18.915221] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3808520
[ 18.915248] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3808519
[ 18.915275] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3808518
[ 18.915301] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3808517
[ 18.915329] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3808515
[ 18.915380] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3808345
[ 18.915410] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3808512
[ 18.915469] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3808823
[ 18.915498] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3946308
[ 18.915529] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3946232
[ 18.915556] EXT4-fs (sda1): 23 orphan inodes deleted
[ 18.915562] EXT4-fs (sda1): recovery complete
[ 19.218909] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 27.180298] udev[388]: starting version 163
[ 27.261320] Adding 4606972k swap on /dev/sda5. Priority:-1 extents:1 across:4606972k
[ 27.351277] lp: driver loaded but no devices found
[ 27.378500] intel_rng: Firmware space is locked read-only. If you can't or
[ 27.378505] intel_rng: don't want to disable this in firmware setup, and if
[ 27.378508] intel_rng: you are certain that your system has a functional
[ 27.378510] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 27.615199] Disabling lock debugging due to kernel taint
[ 27.725254] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 27.757590] ndiswrapper version 1.56 loaded (smp=yes, preempt=no)
[ 27.973057] usb 1-7: reset high speed USB device using ehci_hcd and address 4
[ 28.162006] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 28.162061] Intel ICH 0000:00:1e.2: setting latency timer to 64
[ 28.201282] ndiswrapper (import:233): unknown symbol: ntoskrnl.exe:'_aulldvrm'
[ 28.201771] ndiswrapper: driver net8192cu (Realtek Semiconductor Corp.,07/13/2010,1006.1.0713.2010) loaded
[ 28.592088] intel8x0_measure_ac97_clock: measured 54462 usecs (2624 samples)
[ 28.592096] intel8x0: clocking to 48000
[ 28.681113] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 29.338193] wlan0: ethernet device 00:a1:b0:30:23:ec using NDIS driver: net8192cu, version: 0x1, NDIS version: 0x500, vendor: 'Realtek RTL8192C Wireless LAN USB NIC ', 0BDA:8176.F.conf
[ 29.338286] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 29.338791] usbcore: registered new interface driver ndiswrapper
[ 29.379691] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.226759] ppdev: user-space parallel port driver
[ 34.185145] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 37.539200] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 37.592736] ISOFS: changing to secondary root
[ 70.205154] tg3 0000:40:00.0: eth0: Link is up at 1000 Mbps, full duplex
[ 70.205163] tg3 0000:40:00.0: eth0: Flow control is on for TX and on for RX
[ 70.205450] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 81.168018] eth0: no IPv6 routers present
[304702.273149] tg3 0000:40:00.0: eth0: Link is down
[304759.114809] tg3 0000:40:00.0: eth0: Link is up at 1000 Mbps, full duplex
[304759.114815] tg3 0000:40:00.0: eth0: Flow control is on for TX and on for RX
[906737.552443] usb 1-7: USB disconnect, address 4
[906737.588039] ndiswrapper: device wlan0 removed
[906751.593056] usb 1-2: new high speed USB device using ehci_hcd and address 5
[906751.853439] usb 1-2: reset high speed USB device using ehci_hcd and address 5
[906751.996834] ndiswrapper (import:233): unknown symbol: ntoskrnl.exe:'_aulldvrm'
[906751.997320] ndiswrapper: driver net8192cu (Realtek Semiconductor Corp.,07/13/2010,1006.1.0713.2010) loaded
[906752.953541] wlan0: ethernet device 00:a1:b0:30:23:ec using NDIS driver: net8192cu, version: 0x1, NDIS version: 0x500, vendor: 'Realtek RTL8192C Wireless LAN USB NIC ', 0BDA:8176.F.conf
[906752.953624] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[906752.980401] ADDRCONF(NETDEV_UP): wlan0: link is not ready
my distribution: |
No comments:
Post a Comment