Hi, I set up a raid 1 array for my "swap", "/boot", and "/" partitions.
"/boot" = md0
"/" = md1
"swap" = md2
This is the contents of /proc/mdstat:
Code:
Personalities : [raid1]
md2 : active raid1 sda3[0] sdb3[1]
8190968 blocks super 1.1 [2/2] [UU]
md1 : active raid1 sdb2[1]
460798844 blocks super 1.1 [2/1] [_U]
bitmap: 4/4 pages [16KB], 65536KB chunk
md0 : active raid1 sdb1[1]
1023988 blocks super 1.0 [2/1] [_U]
unused devices: <none>
When looking at that it makes me think the raid isn't correct for md0 and md1. Shouldn't md0 also show sda1, and md0 should show sda2?
No comments:
Post a Comment